Anelysis

    APPLICATION

    The nozzle is made for spraying of lubricant on sliding surfaces.

    PRODUCT CHARACTERISTICS

    • Heating
    • Media: for grease and oil
    • separate monitoring of air and grease

    DESIGN

    … with heating
    The design of the nozzle body is as mentioned before.
    There is an additional thermodynamic heating mounted on the side of the housing. The heating performance is 200 Watt.
    A thermostate controls the temperature 70 ±5°C.

    … without monitoring
    The spray nozzle is a mixing block in which grease or oil together with air are blown out through a nozzle.
    Lubricant and compressed-air are fed by tubes with 10 mm diameter. A non-return valve serves as the supply with an opening pressure of 1 bar. Different types of nozzles are available.

    … with monitoring
    The design is similar to the nozzle without monitoring.
    For monitoring there is an additional piston in the duct for the lubricant or airstream integrated. A motion indicator activates the monitoring switch.

    PRINCIPLE OF OPERATION

    According the viscosity of the lubricant the nozzle is usable without heating. In case of high-viscosity oils or low temperatures a heating is necessary.
    The nozzle in combination with the heating is able to spray oils at a surrounding temperature of 20°C with viscosities up to 200.000 mm²/s at + 20°C.

    A. NOZZLES TYPE
    Code
     
    SDU
    B. NOZZLES INSERTS
    Code
    Flat spray nozzle straight
    01
    Round spray nozzle straight
    02
    Flat spray nozzle 90°
    03
    Round spray nozzle 90°
    04

    Flat spray nozzle straight

    Round spray nozzle straight

    Flat spray nozzle 90° *)

    Round spray nozzle 90° *)

    *) Delivery conditions ex works are as shown in the pictures above. The spraying direction is adjustable within an angle of 360° if required. After changing of the spraying direction you have to fix the nozzle again by gluing with the housing.

    C. REVISION
    Code
    Status A
    A
    D. MONITORING
    Code
    without
    00
    Grease
    01
    Compressed air
    02
    Grease and compressed air
    03

    Nozzle with monitoring

    E. HEATING
    Code
    without
    O
    with
    H

    F. ACCESSORIES
    Code
    without
    00
    Fastening clamp (Ø 6 – 20 mm possible)
    01

    TECHNICAL DATA
    Air consumption : nozzle- and pressure dependent
    Grease : up to NLGI class 3
    Oil : up to 200.000 mm²/s at 20°
    Heating : 200 watt, 115/230 V AC
    Thermostate : 70 ±5°C
    Protection class : IP 65
    Sealings : FPM
    Material for housing : Aluminium seawater resistant
    Monitoring switch : technical data see data sheet 66925 P1_GB

    Maintenance:
    Disassembling and cleaning with petroleum.

    EXAMPLE OF ORDER

Interested?

I want to receive:

Price information
Customized advice
Brochure
GET IN TOUCH